Syntho Glass UV

Cena: Zapraszamy do kontaktu z biurem

Syntho-Glass®UV has been specifically designed to be an aesthetically pleasing, nonyellowing superior wrapping system that provides UV stabilization. Syntho-Glass®UV prevents future corrosion and abrasion due to mechanical impact, frost heave, crevice corrosion, galvanic corrosion and vibration abrasion at soil to air interface, and water to air interface as well as pipe support areas.

Description

Syntho-Glass®UV has been specifically designed to be an aesthetically pleasing, nonyellowing superior wrapping system that provides UV stabilization. Syntho-Glass®UV prevents future corrosion and abrasion due to mechanical impact, frost heave, crevice corrosion, galvanic corrosion and vibration abrasion at soil to air interface, and water to air interface as well as pipe support areas.

 

Typical Applications:
Protection at soil-to air interface

  • UV Protection
  • Mechanical, abrasion and splash zone protection
  • Corrosion prevention
  • Support area protection

Benefits:

  • Non-yellowing
  • Prevents corrosion
  • Impact/abrasion resistance
  • Easy to apply
  • No mixing, no measuring ensures consistent glass-to-resin ratio; therefore, consistentresults
  • Can be applied in above- or below-grade and immersion
  • Contains no solvents

Technical data

Property Typical test value
Laminate Thickness 0.011” (2.794mm)
Glass Transition (Tg) Temp 180°F (82°C)
Shore D Hardness 70-80
Short Beam Shear Strength 1,148 psi (79.1 bar)

Additional information

Surface preparation:

Surface preparation and profiling shall promote continuous intimate contact between the CFRP system and pipe by providing a clean, smooth, and circumferential surface. Surface preparation shall be in accordance with SSPC-SP1 “Solvent Cleaning” and SSPC-SP10 / NACE 2 “Near White Blast Cleaning” 1-3 mil surface roughness (25-75 microns). If an exist-ing coating is present, roughen to degloss. The composite repair system is a bond -critical composite repair system requiring a strong adhesive bond between the clean pipe and the composite system.

Installation:

Installation of the composite System shall be performed by NRI qualified applicators only. Surface preparation, mixing of epoxy, and installation of the system are to be in accordance with NRI’s composite Installation Guide, latest revision. Quality control inspection during and after installation of the composite system shall be performed per NRI’s Installation Validation Procedure: Quality Control Records, latest revision.

Storage conditions:

Store in a cool, shaded area at an ambient temperature of 35ºC.