Syntho Steel

Cena: Zapraszamy do kontaktu z biurem

Syntho-Steel™ is a two-part, steel reinforced epoxy putty. It cures in minutes and can repair most anything made of metal, masonry, wood, ceramic, glass and plastics. Syntho-Steel™ contains no solvents, is non-toxic and easily prepares for application. Unlike liquid epoxies, Syntho-Steel™ will not drip or sag and will set on wet surfaces. NSF 61 and BS6920 approved for use with potable water. When fully cured the material produces a durable, resilient bond resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.

Categories: , , ,

Description

Syntho-Steel™ is a two-part, steel reinforced epoxy putty. It cures in minutes and can repair most anything made of metal, masonry, wood, ceramic, glass and plastics. Syntho-Steel™ contains no solvents, is non-toxic and easily prepares for application. Unlike liquid epoxies, Syntho-Steel™ will not drip or sag and will set on wet surfaces. NSF 61 and BS6920 approved for use with potable water. When fully cured the material produces a durable, resilient bond resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.

Typical Applications:

  • Repair leaking water pipes
  • Seals leaks in oil and water tanks
  • Plug holes and seals
  • Fill corrosion voids
  • Designed for low pressure leaks

Technical data

Phisical Properties:

Service Temperature Continuous: 121°C
Intermittent: 149°C
Density 2.2 lb/gal, 18.5gm/cm3
Electrical Resistance 30,000 mega-ohms
Solids Content 100%
Shelf Life 24 Months with recommended storage conditions

 

Mechanical properties:

Test Method Result
Hardness Shore D for temp. . 24°C ASTM D2240 80
Tensile Strength ASTM D3163 900
Flexural Strength ASTM D695 12,000 psi (827.3 bar)
Dielectric Strength ASTM D149 300 wolt/mil

Additional information

Surface preparation:

Surface preparation and profiling shall promote continuous intimate contact between the CFRP system and pipe by providing a clean, smooth, and circumferential surface. Surface preparation shall be in accordance with SSPC-SP1 “Solvent Cleaning” and SSPC-SP10 / NACE 2 “Near White Blast Cleaning” 1-3 mil surface roughness (25-75 microns). If an exist-ing coating is present, roughen to degloss. The composite repair system is a bond -critical composite repair system requiring a strong adhesive bond between the clean pipe and the composite system.

Installation:

Installation of the composite System shall be performed by NRI qualified applicators only. Surface preparation, mixing of epoxy, and installation of the system are to be in accordance with NRI’s composite Installation Guide, latest revision. Quality control inspection during and after installation of the composite system shall be performed per NRI’s Installation Validation Procedure: Quality Control Records, latest revision.

Storage conditions:

Store in a cool, shaded area at an ambient temperature of 35ºC.

Datasheets

Datasheet – Syntho Steel

Related products