The Titan®-118 structural repair system is comprised of a unique, uni-directional carbon fiber fabric, saturated with Titan®-Saturant Epoxy, and Titan®-Primer Epoxy primer system.
Structural strengthening of concrete or masonry structures for:
- An increase in load requirements due to code change or design error
- Containment and shear reinforcement
- Seismic retrofitting
- Structural damage
System meets all ACI 440.8-13 material specification requirements
- ICC-ES ESR listed product
- 100% solvent-free
- Zero VOC system
- Long working time, even in hot environments
- Durable, highly resistant to aggressive environments
- Applicable at up to 90% humidity
- High strength and light weight
As detailed on individual product datasheets and determined by NRI engineering calculations.
Mixing and mix ratio:
As detailed on individual product datasheets.
75 minutes @ 75˚F (24˚C), less at higher temperatures.
- Application temperature shall be a minimum of 10˚C and maximum of 138˚C
- Relative humidity must be 85% or below
- Pipe surface must be 15˚C above dew point
The following products are system components of the Titan-118 system:
- Titan-Primer Epoxy
- Titan-Top Coat (if required)
Titan-118 is an ICC-ES, AC-125, ACI 400.8-13 repair system. Consult NRI Engineering for specified use.
Surface preparation shall be in accordance with ACI 546R, ICRI No. 310.1R-2008 and ACI 562-13 detail methods for the repair and surface preparation of concrete.
Installation of the Titan-218 System shall be performed by NRI qualified applicators only. Surface preparation, mixing of epoxy, material saturation, and installation of the system are to be in accordance with NRI’s Titan Installation Guide, latest revision. Quality control inspection during and after installation of the Titan system shall be performed per NRI’s Installation Vali-dation Procedure: Quality Control Records, latest revision.
Cleanup and safety:
For proper information regarding the safe handling, storage, and disposal of chemical prod-ucts, users shall refer to the most recent SDS, latest revision, containing physical, ecologi-cal, toxicological, and other safety-related data.
Epoxy: 12 months
Fabric: 12 months
Store indoors in cool, dry, ventilated storage at temperatures below 95°F (35°C)
Epoxy: store in original, unopened containers
Fabric: store in original packaging away from moisture or any contaminants
Titan-Saturant: 1 gallon (3.8L) and 5 gallons (19L)
Titan-218 fabric: 12” x 300’ (0.3m x 91m) rolls
Typically ships in 12” x 12” x 18” boxes (305mm x 330mm x 1626mm)