Thermo Fill

Cena: Zapraszamy do kontaktu z biurem

Thermo-Fill™ is a two-part, titanium-reinforced epoxy putty designed to bond and repair materials that will be exposed to high temperatures. Thermo-Fill contains no solvents, is non-toxic and easily prepares for application in a variety of industrial maintenance applications. Unlike liquid epoxies, Thermo-Fill will not drip or sag. When fully cured, it produces a durable, resilient bond resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.

Description

Thermo-Fill™ is a two-part, titanium-reinforced epoxy putty designed to bond and repair materials that will be exposed to high temperatures. Thermo-Fill contains no solvents, is non-toxic and easily prepares for application in a variety of industrial maintenance applications. Unlike liquid epoxies, Thermo-Fill will not drip or sag. When fully cured, it produces a durable, resilient bond resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.

 

Typical Applications:

  • Fills corrosion voids
  • Designed for high temperature applications

Benefits:

  • High temperature resistance
  • No shrinking or pulling away
  • No drips or mess
  • No tools required

Technical data

Physical proprieties:

Working Life 1.5 to 2 Hours at 75°F (24°C)
Service Temperature Continuous: 40° to 232°C
Intermittent: 40° to 260°C
Density 16.5 lb/gal (1.90 g/cm3)
Solids Content 100%
Shelf Life 12 Months with recommended storage conditions

 

Mechanical proprieties:

Test Method Result
Compressive Strength ASTM D695 8,000 psi (551.5 bar)
Hardness, Shore D @ 75°F (24°C) ASTM D2240 80
Lap Shear ASTM D1002 750 psi (17.2 bar) w temp. 166°C
Dielectric Strength ASTM D149 300 volts/mil
Electrical Resistance ASTM D257 30,000 mega-ohms

Additional information

Surface preparation:

Surface preparation and profiling shall promote continuous intimate contact between the CFRP system and pipe by providing a clean, smooth, and circumferential surface. Surface preparation shall be in accordance with SSPC-SP1 “Solvent Cleaning” and SSPC-SP10 / NACE 2 “Near White Blast Cleaning” 1-3 mil surface roughness (25-75 microns). If an exist-ing coating is present, roughen to degloss. The composite repair system is a bond -critical composite repair system requiring a strong adhesive bond between the clean pipe and the composite system.

Installation:

Installation of the composite System shall be performed by NRI qualified applicators only. Surface preparation, mixing of epoxy, and installation of the system are to be in accordance with NRI’s composite Installation Guide, latest revision. Quality control inspection during and after installation of the composite system shall be performed per NRI’s Installation Validation Procedure: Quality Control Records, latest revision.

Storage conditions:

Store in a cool, shaded area at an ambient temperature of 35ºC.

Datasheets

Datasheet – Thermo Fill