Titan 218

Cena: Zapraszamy do kontaktu z biurem

The Titan®-218 structural repair system is comprised of a unique, bi-directional carbon fiber fabric, saturated with Titan®-Saturant Epoxy.


The Titan®-218 structural repair system is comprised of a unique, bi-directional carbon fiber fabric, saturated with Titan®-Saturant Epoxy.
Typical Applications:
Structural strengthening of concrete or masonry structures for:

  • An increase in load requirements due to code change or design error
  • Containment and shear reinforcement
  • Seismic retrofitting
  • Structural damage

System meets all ACI 440.8-13 material specification requirements:

  • 100% solvent-free
  • Zero VOC system
  • Long working time, even in hot environments
  • Durable, highly resistant to aggressive environments
  • Applicable at up to 90% humidity
  • High strength and light weight

Technical data

Mechanical properties

Test Method Result
Tensile Strength ASTM D3039 Primary: 133 ksi (9,209.39 bar)
Secondary: 133 ksi (9,209.39 bar)
Elongation @ Break ASTM D3039 1.46%
Tensile Modulus ASTM D3039 7.14 msi (492,561.5 bar)
Laminate Thickness Per layer 0.028”


Dry Fiber Material Properties

Property Typical Tests Value
Tensile Strength 550,000 psi (3.79 GPa)
Tensile Modulus 34.5 x 106 psi (230 GPa)
Ultimate Elongation 1.5%
Density 0.065 lbs./in.3 (1.8 g/cm3)
Weight per square yard 18 oz. (600 g/m2)


Titan – primer, Titan Saturant Epoxy Material Properties

Property Typical Tests Value
Tensile Strength 9,500 psi (65.5 MPa)
Tensile Modulus 380 ksi (2,620 MPa)
Elongation at Break 4%
Flexural Strength 14,530 psi (100.2 MPa)
Flexural Modulus 865 ksi (5,964 MPa)
Glass Transition Temp (Tg) 185˚F (85°C)


Cure schedule

Temperature Working Time Set Time
50°F (10°C) 225 minutes 24 hours
60°F (16°C) 150 minutes 12 hours
75°F (24°C) 75 minutes 6 hours
90°F (32°C) 35 minutes 3 hours

Additional information


As detailed on individual product datasheets and determined by NRI engineering calculations.

Mixing and mix ratio:

As detailed on individual product datasheets.

Pot life:

75 minutes @ 75˚F (24˚C), less at higher temperatures.


  • Application temperature shall be a minimum of 10˚C and maximum of 138˚C
  • Relative humidity must be 85% or below
  • Pipe surface must be 15˚C above dew point

Related products:

The following products are system components of the Titan-118 system::

  • Titan-Primer Epoxy
  • Titan-Saturant
  • Titan-Top Coat (if required)


Titan-218 is an ICC-ES, AC-125, ACI 400.8-13 repair system. Consult NRI Engineering for specified use.

Surface preparation:

Surface preparation shall be in accordance with ACI 546R, ICRI No. 310.1R-2008 and ACI 562-13 detail methods for the repair and surface preparation of concrete.


Installation of the Titan-218 System shall be performed by NRI qualified applicators only. Surface preparation, mixing of epoxy, material saturation, and installation of the system are to be in accordance with NRI’s Titan Installation Guide, latest revision. Quality control inspection during and after installation of the Titan system shall be performed per NRI’s Installation Vali-dation Procedure: Quality Control Records, latest revision.

Cleanup and safety:

For proper information regarding the safe handling, storage, and disposal of chemical prod-ucts, users shall refer to the most recent SDS, latest revision, containing physical, ecologi-cal, toxicological, and other safety-related data.

Shelf Life:

Epoxy: 12 months
Fabric: 12 months

Storage conditions:

Store indoors in cool, dry, ventilated storage at temperatures below 95°F (35°C)
Epoxy: store in original, unopened containers
Fabric: store in original packaging away from moisture or any contaminants


Titan-Saturant: 1 gallon (3.8L) and 5 gallons (19L)
Titan-218 fabric: 12” x 300’ (0.3m x 91m) rolls
Typically ships in 12” x 12” x 18” boxes (305mm x 330mm x 1626mm)